LCD DV 42LH90
90
February 2010
Invisible Speaker System Overview (Tweeters)
Invisible Speaker System Overview (Tweeters)
Invisible Speaker has a
adhesive surface which
adheres to front bezel.
Invisible Speaker Tweeter
shown separately. The Front (down)
has an adhesive surface which
adheres to front bezel. Note, there is
no diaphragm, only voice coil.
Outlined
Circle
Speaker
Attachment
post
Cabinet works as
a diaphragm.
Elimination of the
conventional
speaker.
The front bezel is shown below. Note: the outlined
circle is the location for the front adhesive pad on
the Invisible Speaker. This prevent the coil from
bouncing off the plastic causing vibrations.
WARNING: Removing the Tweeter will
destroy the speaker as shown above.
The diaphragm/spider is glued to the
front bezel. When removing, it will tear.
Tweeter p/n EAB58536001