LG 42LH90 - DVI to HDMI Connection for External Devices; Connecting Devices with DVI Output; Using DVI-to-HDMI Input and Adapters

LCD DV 42LH90
22
February 2010
Remove the 3 Screws in the T-CON
shield and remove the shield
CN5 CN4
Disconnect CN1, CN2, CN4 and CN5.
See next slide for details about removing cables.
The two screws shown in the picture
below are for the Service Position.
They would have been removed
when removing the shield.
Be sure to reinstall them if
servicing the T-CON Board.
CN1 CN2
STEP (1)
STEP (2)
T
T
-
-
CON Board Removal
CON Board Removal
Note: Chocolate
(Heat Sink
Material)