LG 42LH90 - VCR Setup: Antenna and Composite Connections; Antenna Connection for VCR; Composite (RCA) Connection for VCR

LCD DV 42LH90
25
February 2010
Removing the Main Board
Removing the Main Board
Remove any tape holding
down any cables.
Remove the 6 screws
indicated by the arrows.
P600
P700
Flip the locking tab upward, pull the LVDS ribbon out.
NOTE: Always check on
top and behind the Large
ICs. And look for a piece
of Chocolate
(Heat Transfer Material).
Be sure to transfer to
new Board if present.
Disconnect P3500,
P3501, P3502, P1200,
P700 and P600
P3500 P3502
Press in on the top
and bottom release
tabs to remove.
P1200
n/c
n/c
Decorative
Plastic
(See a and b)
(a)
Slide
Right
(b)
Lift
Out
Pull
Down
P3501
Remove decorative
plastic and remove the
board.