What to do if the 'Check signal cable' message appears on my LG 42WL10MS Monitor?
If you see a 'Check signal cable' message, it means the connection between your PC and the monitor is not working. First, check the signal cable to ensure it's properly connected. If the issue persists, press the 'INPUT' menu on the remote control to verify the input signal.
Why does the 'Out of range' message appear on my LG 42WL10MS?
The 'Out of range' message appears because the signal from your PC (video card) is outside the monitor's supported vertical or horizontal frequency range. Adjust the frequency range according to the Specifications in this manual. The maximum resolution is RGB: 1920 x 1080 @ 60 Hz; HDMI/DVI: 1920 x 1080 @ 60 Hz.
What to do if there is no sound on my LG Monitor?
If there is no sound, check if the audio cable is connected properly. Also, adjust the volume and make sure the sound settings are properly configured.
How to fix a screen with poor color resolution (16 colors) on my LG Monitor?
To resolve poor color resolution, set the number of colors to more than 24 bits (true color). In Windows, go to Control Panel - Display - Settings - Color Table menu to adjust this setting.
What to do if the screen is displayed abnormally on my LG Monitor?
If your screen is displaying abnormally, the input signal may not be properly connected. Ensure that you connect the signal cable that corresponds to the source input signal.
What to do if the power suddenly turned off on my LG 42WL10MS Monitor?
If the monitor suddenly turns off, check if the sleep timer is set. Also, verify the power control settings. Finally, make sure there wasn't a power interruption.
Why is the screen color unstable or mono-colored on my LG Monitor?
If the screen color is unstable or mono-colored, check the connection status of the signal cable. You can also try re-inserting the PC video card.
How to fix horizontal noise or blurred characters on my LG 42WL10MS?
If you're experiencing horizontal noise or blurred characters and using a D-Sub analog signal, press the "AUTO" button on the remote control to automatically optimize the screen. If the issue persists, use the Phase OSD menu.
Why is the sound too dull on my LG 42WL10MS?
If the sound is too dull, select the appropriate equalize sound setting.
What to do if the screen position is wrong on my LG 42WL10MS Monitor?
If the screen position is incorrect, and you're using a D-Sub analog signal, press the "AUTO" button on the remote control. This will automatically select the optimal screen status. If it's still not right, use the Position OSD menu. Also, ensure that the video card resolution and frequency are supported by the monitor. If the frequency is out of range, set the recommended resolution in the Control Panel "Display" settings.
General| Screen Size | 42 inches |
|---|---|
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Contrast Ratio | 1000:1 |
| Connectivity | HDMI, USB |
| Viewing Angle | 178° (H) / 178° (V) |
| Ports | HDMI, USB |
| Speakers | 10W x 2 |
| VESA Mount | 200 x 200 mm |
To Next Page
