maintain optimal functionality. While the software is updated the screen of your device may,
in the absence of any user interaction within 4 hours, turn off, but the device will not
completely enter standby mode until the installation is finished. This can result in an
increased power consumption during software update.
Screen Self-diagnosis
Support Screen Self-diagnosis
After running a test to verify that the image signal is output normally, you can select
whether there is an error with the signal on the screen.
If there are no problems in the test, check the connected external device or broadcast
signal.
Sound Self-diagnosis
Support Sound Self-diagnosis
Start the Sound Test to check that the sound signal output is normal, and then select
whether there is an error.
If there are no problems in the test, check the connected external device or broadcast
signal.
Home/Store Mode
Support Home/Store Mode
You can choose between Home Mode and Store Mode.
To use the TV at home, select Home Mode.
Select Store Mode only when the TV will be displayed in store. The Store Mode
provide settings optimised for store display.
TV Information
Support TV Information
You can view information including Model, Serial Number, Device Name.
IP Control Settings
Support IP Control Settings
Uses the IP control device to control the TV connected to the network.
To Next Page
Loading...
