If you press and hold a number button that has already been registered, the registered
function will be performed.
To see the items that can be registered, select a number that has not been registered in
the Quick Access edit mode.
If you are in a mode where Quick Access cannot run, no action will be performed.
If you delete a registered app, Quick Access will be deregistered as well.
Checking and Editing Quick Access
Press and hold the 0 button on the remote control.
The Quick Access edit screen appears.
Connecting to SIMPLINK (HDMI-CEC)
Launch the app or select the programme or input you wish to assign.01
Press and hold the number button (1~8) you want to register.
No. 9 is fixed to Quick Help.
02
When the registration pop-up window appears, select Yes.03
Selecting a number that has already been registered allows deregistering it.
When you select a number that has not been registered, items that can be registered will
be shown.
An item that has been registered to a different number is indicated with a check mark.
You can view a brief instruction for this function.
To Next Page
Loading...
