When the Method is set to 22 Points Signal Level(%), you can select the
brightness with the 22 levels of brightness.
Show brightness level at the maximum signal level(%)
Adjusts the luminance of the highest 100% signal level.
Adjust brightness level at the selected signal level(%)
The brightness of the selected signal level can be adjusted.
You can do these settings only when the Picture Select Mode is the Cinema,
Expert (Bright space, daytime) or the Expert (Dark space, night) and when the
Method is set to 10 Points Signal Level(%) or 22 Points Signal Level(%).
Red / Green / Blue
Adjust the color temperature of the selected point.
Adjust the intensity of Red/Green/Blue in the range of -50 to 50.
You can adjust respective values for the brightness selected in Point.
Depending on the input signal or the selected picture mode, the available options may
differ.
The configurable items differ depending on model.
Adjusting the Contrast of a Picture
Picture Advanced Settings Clarity
You can adjust the contrast of a Picture to show it more clearly.
Adjust Sharpness
Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the
image.
Super Resolution
Adjusts the resolution to make dim and blurred images clearer.
Noise Reduction
Removes small dots that stand out so as to make the image clean.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
