ASSEMBLING AND PREPARING 15
Mounting on a Table
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (4 inches) (minimum) space from the wall
for proper ventilation.
s
s _
5 cm 10 cm
jJJ
.jJ
I//
jl j
j_J
jJJ
JJ
j/J
j/--
2 Connect the power cord to a wall outlet.
_ _Z CAUTION -,}
[ • Do not place the TV near or on sources of heat, as this |
, may result in fire or other damage.
1 Insert and tighten the eye-bolts, or TV brackets and bolts on
the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove
the bolts first.
2 Mount the wall brackets with the bolts to the walt.
Match the location of the wall bracket and the eye-bolts on
the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy
rope or cable.
Make sure to keep the rope parallel to the flat surface.
A CAUTION
Make sure that children do not climb on or hang on the
TV.
_@ NOTE
Use a platform or cabinet that is strong and large enough
to support the TV securely.
Brackets, bolts, and ropes are optional. You can obtain
additional accessories from your local dealer.
To Next Page
Loading...
