MAKING CONNECTIONS 23
Connecting to an HD receiver, DVD Player, or VCR
Connect an HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.
NOTE
(For 77EG9700)
• HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting.
• The HDMI IN 3 port is especially suitable for the specifications to enjoy UHD Video (4:4:4, 4:2:2) of 4K @60 Hz. However, video
or audio may not be supported depending upon the specifications of the external equipment. In that case, use any other HDMI
• IN port.
Contact customer service for more information on the HDMI specifications of each input port.
HDMI Connecfion
HDMI is the best way to connect a device.
Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI
cabte as shown in the following illustration.
NOTE
• Use the latest High Speed HDMt TM Cable that supports CEC (Customer Electronics Control) function.
High Speed HDMI TM Cables are tested to carry an HD signal up to 1080p and higher.
HDMI Audio Supported Format: PCM (32 kHz/44.1 kHz/48 kHz/96 kHz/192 kHz)
if you use a reguiar HDMI cable, use a high-speed HDMI cable (3m or less). (For 77EG9700)
Choose any HDMI input port to connect.
It does not matter which port you use, (For 55EC93OO)
(For 55EC9300)
Not Provided)
DVD / Blu-Ray / HD Cable Box / HD STB
To Next Page
Loading...
