ENGLISH
15
ASSEMBLING AND PREPARING
Mounting on a Table
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (4 inch) (minimum) space from the wall for
proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2
Connect the power cord to a wall outlet.
y
Do not place the TV near or on sources of heat, as this
may result in fire or other damage.
CAUTION
Securing the TV to a wall (optional)
1
Insert and tighten the eye-bolts, or TV brackets and bolts on
the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove
the bolts first.
2
Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and the eye-bolts on
the rear of the TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy
rope or cable.
Make sure to keep the rope parallel to the flat surface.
y
Make sure that children do not climb on or hang on the
TV.
CAUTION
y
Use a platform or cabinet that is strong and large enough
to support the TV securely.
y
Brackets, bolts, and ropes are optional. You can obtain
additional accessories from your local dealer.
NOTE
To Next Page
Loading...
