LG 55EC930V - Registering Magic Remote; How to Use Magic Remote

ENG
ENGLISH
MAGIC REMOTE FUNCTIONS
Registering Magic Remote
How to register the Magic Remote
BACK
HOME
P
MY APPS
(Wheel)
To use the Magic Remote, rst
pair it with your TV.
1 Put batteries into the Magic
Remote and turn the TV on.
2 Point the Magic Remote at
your TV and press the
Wheel (OK) on the remote
control.
* If the TV fails to register the
Magic Remote, try again after
turning the TV off and back on.
How to deregister the Magic Remote
(BACK)
(Home)
Press the (BACK) and
(Home) buttons at the same
time, for ve seconds, to unpair
the Magic Remote with your TV.
* Pressing and holding the
(EXIT to LIVE) button will let
you cancel and re-register
Magic Remote at once.
Voice recognition
Network connection is required to use the voice
recognition function.
1. Press the Voice recognition button.
2. Speak when the voice display window ap-
pears on the left of the TV screen.
• The voice recognition may fail when you
speak too fast or too slow.
• Use the Magic remote control no further
than 10 cm from your face.
• The recognition rate may vary depending
on the user’s characteristics (voice,
pronunciation, intonation and speed) and
the environment (noise and TV volume).
How to use magic remote
y
Shake the Magic Remote
slightly to the right and left or
press (Home), ,
buttons to make the pointer
appear on the screen.
(In some TV models, the
pointer will appear when you
turn the Wheel button.)
y
If the pointer has not been
used for a certain period
of time or Magic Remote is
placed on a flat surface, then
the pointer will disappear.
y
If the pointer is not
responding smoothly, you can
reset the pointer by moving it
to the edge of the screen.
y
The Magic Remote depletes
batteries faster than a normal
remote due to the additional
features.
28
ENG
ENGLISH