15
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a Table
(Image shown may differ from your TV)
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
• Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
CAUTION
Securing the TV to a wall (optional)
(Depending upon model)
1 Insert and tighten the eye-bolts or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable.
Make sure to keep the rope parallel to the flat
surface.
• Make sure that children do not climb on or hang
on the TV.
CAUTION
• Use a platform or cabinet that is strong and large
enough to support the TV securely.
• Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local
dealer.
NOTE
Tidying Cables
Gather and bind the cables with the cable holder.
Cable Holder
• Do not move the TV by holding the cable holder,
as the cable holders may break, and injuries and
damage to the TV may occur.
CAUTION
To Next Page
Loading...
