LG 55EG910V-ZB - Registering and Deregistering the Magic Remote

ENGLISH ENGLISH
49
MAGIC REMOTE FUNCTIONS
Registering magic remote
How to register the magic remote
BACK
HOME
P
MY APPS
(Wheel)
To use the Magic Remote,
rst pair it with your TV.
1 Put batteries into the
Magic Remote and turn
the TV on.
2 Point the Magic Remote
at your TV and press the
Wheel (OK) on the
remote control.
* If the TV fails to register
the Magic Remote, try
again after turning the
TV o and back on.
How to deregister the magic remote
(BACK)
(Home)
Press the (BACK) and
(HOME) buttons at
the same time, for ve
seconds, to unpair the
Magic Remote with your
TV.
* Pressing and holding
the button will
let you cancel and re-
register Magic Remote
at once.
How to use magic remote

Shake the Magic Remote
slightly to the right and
left or press (HOME),
(INPUT), buttons
to make the pointer
appear on the screen.
(In some TV models, the
pointer will appear when
you turn the Wheel
(OK) button.)

If the pointer has not b
een used for a certain
period of time or Magic
Remote is placed on a
flat surface, then the
pointer will disappear.

If the pointer is not
responding smoothly,
you can reset the pointer
by moving it to the edge
of the screen.

The Magic Remote
depletes batteries faster
than a normal remote
due to the additional
features.