ENGLISH
64
30. White Balance Red Offset (Command: s x)
Adjusts the red offset value for white balance.
Transmission
[s][x][ ][Set ID][ ][Data][Cr]
Data 00 to 7F: Red offset 0 to 127
FF: Checks red offset value
Acknowledgment
[x][ ][Set ID][ ][OK/NG][Data][x]
31. White Balance Green Offset (Command: s y)
Adjusts the green offset value for white balance.
Transmission
[s][y][ ][Set ID][ ][Data][Cr]
Data 00 to 7F: Green offset 0 to 127
FF: Checks green offset value
Acknowledgment
[y][ ][Set ID][ ][OK/NG][Data][x]
32. White Balance Blue Offset (Command: s z)
Adjusts the blue offset value for white balance.
Transmission
[s][z][ ][Set ID][ ][Data][Cr]
Data 00 to 7F: Blue offset 0 to 127
FF: Checks blue offset value
Acknowledgment
[z][ ][Set ID][ ][OK/NG][Data][x]
33. Backlight (Command: m g)
Adjusts the backlight brightness.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgment
[g][ ][set ID][][OK/NG][Data][x]
34. Screen Off (Command: k d)
Turns off/off the screen.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen On
01: Screen Off
Acknowledgment
[d][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported on some models.
35. Tile Mode (Command: d d)
Sets a tile mode and values for the tile rows and columns.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: the first byte - tile column
The second byte - tile row
* 00, 01, 10, and 11 mean that the tile mode is off
* The maximum value may differ depending on the model.
Acknowledgment
[d][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported on some models.
To Next Page
Loading...
