ENGLISH
71
61. Content Sync (Command: t g)
Sets Content Sync.
Transmission
[t][g][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[g][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported on some models.
62. LAN Daisy Chain (Command: s n, 84)
Turns on/off LAN Daisy Chain.
Transmission
[s][n][ ][Set ID][ ][8][4][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][8][4][Data][x]
* This feature may not be supported on some models.
63. Content Rotation (Command: s n, 85)
Turns on/off Content Rotation.
Transmission
[s][n][ ][Set ID][ ][8][5][ ][Data][Cr]
Data 00: Off
01: 90 degrees
02: 270 degrees
03: 180 degrees
Acknowledgment
[n][ ][Set ID][ ][OK/NG][8][5][Data][x]
* This feature may not be supported on some models.
64. Scan Inversion (Command: s n, 87)
Turns on/off Scan Inversion.
Transmission
[s][n][ ][Set ID][ ][8][7][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][8][7][Data][x]
* This feature may not be supported on some models.
65. Beacon (Command: s n, 88)
Turns on/off Beacon.
Transmission
[s][n][ ][Set ID][ ][8][8][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][8][8][Data][x]
* This feature may not be supported on some models.
66. Brightness Scheduling Mode (Command: s m)
Selects a Brightness Scheduling mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Brightness Scheduling off
01: Brightness Scheduling on
* This feature does not work if the current time is not set.
* This feature may not be supported on some models.
Acknowledgment
[m][ ][Set ID][ ][OK/NG][Data][x]
To Next Page
Loading...
