LG 55EJ5E - Page 111

ENGLISH
73
70. Screen Off (Multi Screen) (Command: x e)
Turns on/off each screen in the Multi Screen.
Transmission
[x][e][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data 1 Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data 2 00: Screen off
01: Turns the screen off.
* This feature only works when the Multi Screen app is running.
* This feature does not work when there is no signal.
Acknowledgment
[e][ ][Set ID][ ][OK/NG][Data1][Data2][x]
* This feature may not be supported on some models.
71. Screen Off Always (Command: s n, 0d)
If you activate the Screen Off Always feature, the monitor
enters Screen Off mode regardless of whether or not you have
activated PM mode.
Transmission
[s][n][ ][Set ID][ ][0][d][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][0][d][Data][x]
* This feature may not be supported on some models.
72. Screen Video Freeze (Command: k x)
Turns on/off the Screen Video Freeze feature.
Transmission
[k][x][ ][Set ID][ ][Data][Cr]
Data 00: Turns on the freeze function.
01: Turns off the Freeze feature.
* This feature only works in single input mode.
Acknowledgment
[x][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported on some models.
73. Wireless Wake On LAN (Command: s n, 90)
Sets the Wireless Wake-on-LAN feature.
Transmission
[s][n][ ][Set ID][ ][9][0][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][0][Data][x]
* This feature may not be supported on some models.
74. OSD Output (Command: k l)
Selects an OSD Output option.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off (OSD Lock: On)
01: On (OSD Lock: Off)
Acknowledgment
[l][ ][Set ID][ ][OK/NG][Data][x]
75. HDMI IT Contents (Command: s n, 99)
Automatically sets the picture mode based on HDMI data.
Transmission
[s][n][ ][Set ID][ ][9][9][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][9][Data][x]
* This feature may not be supported on some models.