32
206-4307
Installer Menu (Cont.)
Installer Menu Items 000 through 071
Item Function Value Range Default Value Brief Description of Function
000 INSTALLER SEQ 0 – 3 0 Leave default set to 0.
001 POWER MANAGE 0 – 7 0
Selects the number of hours of inactivity allowed before the TV automatically
turns itself OFF. Set to 0 to disable Power Management.
002 AC ON 0, 2, 3 0
Set to 2 or 3 to enable Instant ON when AC power is applied. (See detailed
descriptions.)
003 BAND/AFC 0 – 3 1 Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
004 STRT CHANNEL 0 – 127, 253, 255 255
Channel tuned when TV is turned ON. (Set to 255 to tune to channel
tuned before TV turned OFF.)
005 CHAN LOCK 0 / 1 0 If set to 1, cannot tune from current channel.
007 STRT VOLUME 0 – 63, 255 255
Volume level when TV is turned ON. (Set to 255 to use volume level
before TV turned OFF.)
008 MIN VOLUME 0 – 63 0 Sets minimum allowable volume setting.
009 MAX VOLUME 0 – 63 63 Sets maximum allowable volume setting.
010 MUTE DISABLE 0 / 1 0 Set to 1 to disable Mute Function.
011 KEY DEFEAT 0 / 1 0
If set to 1, joystick/dome button menu navigation functions on display panel
are not available.
015 SLEEP TIMER 0 / 1 1 Set to 1 to enable Sleep Timer.
016 EN TIMER 0 / 1 0 Set to 1 to enable On/Off Timers.
017 ALARM 0 / 1 1 Set to 1 to enable Alarm.
020 FEATURE LEVEL 0, 16 – 24 0 Determines an additional IR code scheme to which the TV will respond.
021 V-CHIP 0 / 1 1 Set to 1 to enable V-Chip (Parental Control) functions.
022 MAX BLK HRS 0 – 99 12 Sets number of V-Chip blocking hours.
023 CAPTION LOCK 0 / 1 0 Set to 1 to retain caption setting set before TV turned OFF.
028 CH. OVERIDE 0 / 1 1
If set to 0, users can only tune to channels that are included in the PTC
Channel Map. (See detailed descriptions.)
029 OLD OCV 0 / 1 0 Set to 1 to remap the PTC’s direct tune channels for Aux inputs from 13x to 9x.
030 ACK MASK 0 / 1 0 If set to 1, enables ACK feature of MPI.
031 POLL RATE 20 – 169 94 Selects poll rate for MPI.
032 TIMING PULSE 186 – 227 207 Sets baud rate for MPI.
035 HDMI1 ENABLE 0 – 2 1
Set to 0 to disable HDMI 1. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 1.
039 REAR AUX EN. 0 / 1 1 Set to 1 to enable display panel AV input jack.
041 SIMPLINK EN 0 / 1 0 Determines the status of the SIMPLINK feature. (See detailed descriptions.)
042 AUTO INPUTS 0 – 255 0
Determines the Aux inputs for which auto-sensing is enabled. (See detailed
descriptions.)
046 STRT AUX SRCE 1, 3, 5, 7, 255 7 Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
047 AUX STATUS 0 / 1 0
Controls MPI status channel response for Aux sources. Set to 1 for the Aux
source to be reported as its channel number.
049 DIS. AUDIO M. 0 – 9 0
Determines the availability of the Sound Out (Audio) Menu in the TV menus, as
well as the default Audio Mode when TV is turned ON. (See detailed descriptions.)
053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable the TV’s native Channel-Time display.
069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for MPI display characters.
070 FOR. CH-TIME 0 – 7 2 Chooses custom foreground color for MPI display characters.
071 BCK. CH-TIME 0 – 7 2 Chooses custom background color for MPI display characters.
To Next Page
Loading...
