LG 55EW960H - EW960 H Rear and Side Jack Panels

82
206-4307
Reference: EW960H Rear and Side Jack Panels
USB IN 1
IN 1
SPEAKER OUT
LINE OUT
RJP Use Only
MPI
ANTENNA/
CABLE IN
OPTICAL
DIGITAL
AUDIO OUT
RESET
UPDATE
SERVICE
RS-232C IN
(CONTROL)
LAN
AUX LAN
PTC SERVICE
(SERVICE ONLY)
AV IN
Audio In
AV IN/AUDIO IN (DVI)
(3.5 mm jack) Connect video/audio
output from external device (use A/V
adapter cable provided with TV).
UPDATE
Restricted to software
updates.
RESET
Initiates a hardware reset
and turns the TV OFF.
MPI
When the TV is in Pass-through Mode,
the MPI function enables an external
MPI control device (i.e., VOD/PPV
STB, etc.) to control the TV.
SPEAKER OUT / LINE OUT
(3.5 mm jack) Connect external audio (xed speaker,
variable speaker, or xed line level [amplier])
equipment. See Reference section, “External Stereo
Speaker Specifications,” for further information.
RS-232C IN (CONTROL)
The RS-232C control function enables
an external TLM control device (i.e.,
VOD/PPV STB, etc.) to control the TV.
RJP Use Only
Connection for Remote Jack Pack
(RJP) Control cable.
HDMI IN 1
Connection for HDMI
output from external device.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
PTC SERVICE (SERVICE ONLY)
Restricted to service updates.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater
systems. Note: When the TV is
OFF, this port is not enabled.
AUX LAN & LAN
Use for video IP and/or network connections.
USB IN 1
Insert USB memory device for software updates,
cloning purposes, FTG Mode configuration,
picture/music entertainment, etc., as applicable.
Side Jack Panel
USB IN
32
(
ARC
)
2 (USB 3.0)
IN
USB IN 2
Insert USB memory device for
software updates, cloning
purposes, FTG Mode configuration,
picture/music entertainment, etc.,
as applicable.
HDMI IN 2 & 3
Connection for HDMI output
from external device.
Caution: Do NOT connect a standard
Ethernet cable to the RJP port, as this may
damage the TV and network equipment.
SERVICE
Typically used for downloading
software updates, etc.