LG 55EW960H - Page 67

67
206-4307
Reference: Updating TV/PTC Software using a USB Memory Device
(Cont.)
(Continued from previous page)
Select the file(s) to download, and then select UPDATE below.
Update TV Software
EW960H_CPU_SW.epk
Update PTC Software
EW960H_PTC_SW.txt
Import Clone File
EW960H_IM.tlx
X
USBDEVICE
TV MANAGER
Ez Download
USB 1: Device Name
Ez Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Current TV Software Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
6. Use the Up/Down arrow keys to select Update TV Software or Update PTC Software, as
applicable, and press the Wheel (OK) button.
Depending on your selection, a list of either TV or PTC software les stored in the LG_DTV
folder on the USB memory device will be displayed on the screen. Above the listing of les, you
can also see the current version of TV or PTC software. The following screen sample illustrates
an Update TV Software screen.
X
USBDEVICE
TV MANAGER
Update TV Software
USB 1:
Device Name
Ez Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Select the file to download, and then select UPDATE below.
Current TV Software Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
7. Use the arrow keys to select/highlight the update le to download, and then press the Wheel
(OK) button.
8. When you are ready to download the update, select UPDATE on the screen, and then press
the Wheel (OK) button on the Installer Remote.
Software update progress will be displayed on the screen. Do NOT remove the USB device until
the software update is complete. When the software update is complete, an UPDATE COMPLETE
pop-up banner will briey be displayed at the bottom of the screen, and then, the TV will reboot.