Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
8. USB S/W Download
(optional, Service only)
(1) Put the USB Stick to the USB socket
(2) Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is lower
than that of TV set, it didn’t work. Otherwise USB data is
automatically detected.
(3) Show the message “Copying files from memory”
(4) Updating is staring.
(5) Updating Completed, The TV will restart automatically
(6) If your TV is turned on, check your updated version and
Tool option.
* If downloading version is more high than your TV have, TV
can lost all channel data. In this case, you have to channel
recover. If all channel data is cleared, you didn’t have a DTV/
ATV test on production line.
(7) In terms of FRC version update, below sequence are the
only for LA55J Chassis. (60LF6000-Ux model)
1) When the main sw downloading was finished, if FRC SW
version of TV Set is lower than the FRC version
Included in downloading version, FRC verison update
will be started automatically during displaying the below
figure.
2) Be careful to not be off of TV Power.
3) Udating the FRC is completed, the TV will restrart
automatically.
4) Check your updated FRC version on TV set with pushing
“IN-START” key in service remote controller.
5) In references, FRC version value shown in TV may differ
from below value.
Refer to the BOM aobut the latest FRC version.
* After downloading, TOOL OPTION setting is needed again.
(1) Push "IN-START" key in service remote controller.
(2) Select "Tool Option 1" and Push “OK” button.
(3) Punch in the number. (Each model has their number.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
