LG 55LW5600 - OPTION Settings

MOTION REMOTE BOARD SECTION
The first time the Motion Remote has it’s batteries installed
and pointed at the Television, the Motion Remote is
s nchroni ed ith the TV After that hen pointing the
s
y
nchroni
z
ed
w
ith
the
TV
.
After
that
, w
hen
pointing
the
remote at the TV and pressing the Enter key, a pointer
appears on screen, then by moving the Motion Remote
around, the pointer moves with the movement of the
remote. When the pointer is placed over a selectable
button you can press the center
“
Enter
”
button and
button
,
you
can
press
the
center
Enter
button
and
active the object. This makes navigation much easier.
You can also adjust the volume, change channels and mute
the audio with the Motion Remote and it has a
convenient “Home” button for the TV Menu.
A wrist band can be attached to the remote to avoid dropping
and damaging the remote.
The Motion Remote utilizes a specialized receiver on the
Television to
receive the
RF
signal and this information
Television
to
receive
the
RF
signal
and
this
information
is then routed to P1302 and on to the IC101 the BCM IC
for pointer positioning and interpretation of the other
functions.
How to Re-register the Magic Motion Remote Control after Registration Failure. Reset the
remote control by pressing and holding both the ENTER and MUTE buttons for 5 seconds.
An LED will blink 3 times indicating the remote is ready for registering.
July 2011 LCD TV 55LW56000
92
Motion Remote “Magic Remote” AKB72914043