EasyManuals Logo

LG 55VH7E User Manual

LG 55VH7E
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
ENGLISH
71
Transmission/Reception Protocol
Transmission
(Command1)(Command2)( )(Set ID)( )(Data)(Cr)
* (Command1): This command is used to identify between the adjustment setting or the user adjustment modes.
* (Command2): This command is used to control the monitor.
* (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1
to 1000 (01H to FFH) under Settings in the OSD menu. Selecting '00H' for Set ID allows the simultaneous
control of all connected monitors. (The maximum value may differ depending on the model.)
* (Data): Transmits command data. Data count may increase depending on the command.
* (Cr): Carriage Return. This parameter corresponds to '0 x 0D' in ASCII code.
* ( ): White Space. This parameter corresponds to '0 x 20' in ASCII code.
Acknowledgment
(Command2)( )(Set ID)( )(OK/NG)(Data)(x)
* The product transmits an ACK (acknowledgment) based on this format when receiving normal data. At this point,
if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data of the PC
computer.
* If a command is sent with Set ID '00' (=0 x 00), the data is reflected to all monitors and they do not send an
acknowledgment (ACK).
* If you send "FF" as the value of the data in control mode via RS-232C, you can check the value currently set for the
relevant feature (not applicable to some features).
* Some commands may not be supported on some models.

Table of Contents

Other manuals for LG 55VH7E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 55VH7E and is the answer not in the manual?

LG 55VH7E Specifications

General IconGeneral
Screen Size55 inches
Brightness500 cd/m²
Panel TypeIPS
Aspect Ratio16:9
Operating Temperature0°C to 40°C
Viewing Angle (H x V)178° x 178°
Response Time8 ms
Storage Temperature-20°C to 60°C
Power Consumption150 W
Standby Power Consumption0.5 W
VESA Mount400 x 400 mm
Display TypeLED
Resolution1920 x 1080
ConnectivityHDMI, DVI-D, USB
Contrast Ratio1, 200:1
OutputAudio Out

Related product manuals