8
ENGLISH
This product can be installed in various
locations besides the enclosure.
< Example of the product in the enclosure >
< Example of the lighting installation >
Lighting must be installed in the enclosure.
Installation in Enclosure
Install the product in the enclosure. Wear working gloves when installing the product. Do not
use bare hands. Otherwise, it may cause personal injury.
1
Place the product in the enclosure.
2
Attach the product using the prepared screw holes and an additional enclosure guide
frame.
NOTE
The panel of this product is so thin
that it can be easily broken when it is
exposed to the outside. Please use the
protective glass to prevent the product
from directly being exposed to the
outside.
When installing the product in its hous-
ing, make sure that the framework of
the product is grounded. (This helps
prevent the product being damaged in
the event of thunder and lightning.)
CAUTION
To Next Page
Loading...
Need help?
General