What to do if my LG 60PA6500 Plasma TV says 'No Signal'?
If your LG Plasma TV displays 'No Signal', ensure the signal cable is correctly connected between the TV and any connected devices. Also, verify the selected input source by pressing the INPUT button on your remote.
Why does my LG Plasma TV turn off suddenly?
If your LG Plasma TV suddenly turns off, first examine the power control settings to ensure the power supply isn't interrupted. Then, verify if the Auto sleep feature is enabled within the Time settings. Also, be aware that the TV will automatically shut down after 15 minutes of inactivity if no signal is detected while it's on.
What to do if LG Plasma TV touch pen is not working?
If the touch pen does not work with your LG Plasma TV, first ensure you've entered Pentouch mode using the remote control. Check that the Pentouch dongle is connected to the computer and its red LED is illuminated. Press the (POWER) button on the touch pen to confirm it's powered on. Verify the touch pen is paired correctly (the red LED should light up briefly when you press the Touch Home button). Finally, set the computer screen to display only on the TV.
How to calibrate touch pen on LG 60PA6500 Plasma TV?
If the touch pen is touched on wrong positions on your LG Plasma TV, first, set the computer screen to display only on the TV. If you're using a PC signal (RGB) cable and the touch point on the TV screen doesn't match the point indicated on the computer screen, use the TV remote to navigate to [SETTINGS] ? [Picture] ? [Screen] (RGB-PC), then select [Auto Config.] to adjust the screen.
How to fix LG 60PA6500 Plasma TV remote control not working?
If you cannot control your LG Plasma TV with the remote, start by checking the remote control sensor on the TV and try again. Ensure there are no obstacles blocking the path between the remote and the TV. Finally, verify that the batteries in the remote are working correctly and are properly installed, paying attention to the correct polarity (+ to -, + to -).
How to fix abnormal screen when using Pentouch on LG Plasma TV?
If the TV screen doesn’t look normal when using Pentouch with your LG Plasma TV, first verify that the computer is correctly connected to the TV. Then, check that you are using the optimal resolution. Finally, set the aspect ratio on the TV to Just Scan.
How to fix LG 60PA6500 screen when using Pentouch?
To address a non-normal screen appearance when using Pentouch on your LG Plasma TV, first, verify that the computer is properly connected to the TV. Next, ensure that you are using the optimal resolution. Finally, set the aspect ratio on the TV to Just Scan.
Why my LG Plasma TV has no image and sound?
If your LG Plasma TV shows no image and produces no sound, first ensure that the TV is turned on. Then, check whether the power cord is properly connected to the wall outlet. Finally, test the wall outlet by connecting other products to see if there's a problem with the outlet itself.
What to do if my LG 60PA6500 turns off suddenly?
If your LG Plasma TV turns off suddenly, it might be due to an interruption in the power supply. Check the power control settings. Also, the Auto sleep feature in the Time settings might be activated. If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
Why does my LG 60PA6500 Plasma TV keep turning off?
If your LG Plasma TV turns off suddenly, check the power control settings to ensure the power supply isn't interrupted. Also, see if the Auto sleep feature is activated in the Time settings. If there's no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
General| Depth | 53 mm |
|---|---|
| Width | 1386.8 mm |
| Height | 818.2 mm |
| Weight | 36400 g |
| Tuner type | Analog & digital |
| 24p support | Yes |
| Pixel pitch | - mm |
| Smart modes | Cinema, Game, Sports, Standard, Vivid |
| Aspect ratio | 16:9 |
| HDMI version | 1.3 |
| Package depth | 285 mm |
| Package width | 1545 mm |
| Product color | Black |
| Package height | 950 mm |
| Package weight | 48100 g |
| Cables included | AC |
| RMS rated power | 20 W |
| AC input voltage | 100 - 240 V |
| Display diagonal | 59.8 \ |
| AC input frequency | 50 - 60 Hz |
| Built-in subwoofer | No |
| Depth (with stand) | 354.7 mm |
| Display brightness | - cd/m² |
| Display technology | Plasma |
| Number of speakers | 2 |
| Height (with stand) | 883.2 mm |
| Placement supported | Horizontal |
| Weight (with stand) | 40600 g |
| Supported video modes | 1080i, 1080p, 720p |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | MP3 |
| Image formats supported | JPG |
| Number of OSD languages | 4 |
| S-Video inputs quantity | 0 |
| Video formats supported | DIVX, H.264 |
| Contrast ratio (dynamic) | 3000000:1 |
| Contrast ratio (typical) | - |
| Panel mounting interface | 600 x 400 mm |
| Annual energy consumption | 267 kWh |
| Display diagonal (metric) | 152 cm |
| Screen format adjustments | 4:3, 16:9, Zoom |
| Analog signal format system | NTSC, PAL BG |
| Power consumption (standby) | 0.2 W |
| Digital signal format system | ATSC, DVB-T |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| On Screen Display (OSD) languages | ENG, ESP, FRE, KOR |
| Consumer Electronics Control (CEC) | Anynet+ |
To Next Page
