Why does my LG 60PM6700 turn off suddenly?
If your LG Plasma TV turns off unexpectedly, it could be due to a few reasons. First, examine the power control settings to ensure the power supply isn't being interrupted. Secondly, check if the Auto sleep feature is enabled in the Time settings. Lastly, if the TV doesn't receive a signal while it's on, it will automatically shut down after a period of inactivity.
What to do if my LG 60PM6700 has no image and sound?
If your LG Plasma TV shows no image and produces no sound, start by verifying that the TV is powered on. Next, confirm that the power cord is securely connected to a working wall outlet. To ensure the wall outlet is functioning correctly, try plugging in another device.
Why does my LG 60PM6700 Plasma TV turn off by itself?
Your LG Plasma TV might be turning off suddenly due to power control settings, an activated Auto sleep feature, or automatic shutdown after 15 minutes of inactivity when there is no signal. Check these settings to resolve the issue.
What to do if my LG 60PM6700 turns off suddenly?
If your LG Plasma TV turns off unexpectedly, examine the power control settings to ensure the power supply isn't interrupted. Also, verify if the Auto sleep feature is enabled within the Time settings. Note that the TV will automatically shut down after 15 minutes of inactivity if no signal is detected while it's on.
How to fix no signal on LG Plasma TV when connecting to PC RGB HDMI?
If you're encountering a 'no signal' or 'invalid format' message when connecting your PC to your LG Plasma TV via RGB HDMI, try these steps: Turn off the TV, then reconnect the RGB HDMI cable. After that, restart your PC while the TV is powered on.
How to fix LG 60PM6700 Plasma TV screen when Pentouch doesn’t look normal?
If the image on your LG Plasma TV screen doesn't look normal when using Pentouch, ensure that the computer is correctly connected to the TV and that you're using the optimal resolution. Also, set the aspect ratio on the TV to Just Scan.
What to do if my LG 60PM6700 displays ‘No Signal’ or ‘Invalid Format’ when connecting to PC?
If your LG Plasma TV shows a ‘No Signal’ or ‘Invalid Format’ message when connected to a PC via RGB/HDMI DVI, try turning the TV off and then on again. If that doesn't work, reconnect the RGB/HDMI cable. As a final step, restart your PC while the TV is powered on.
Why is my LG Plasma TV remote not working?
If your LG Plasma TV isn't responding to the remote, first, ensure there's nothing blocking the sensor on the TV itself. Then, check for any obstructions between the remote and the TV. Finally, make sure the remote batteries are working and correctly installed.
How to fix LG Plasma TV remote control not working?
There are a few things to check if your LG Plasma TV remote isn't working. First, ensure there are no obstacles blocking the path between the remote and the TV's sensor. Then, check the batteries in the remote to make sure they are properly installed and still have power. Finally, check the remote control sensor on the product and try again.
What to do if the touch pen does not work with my LG 60PM6700?
If the touch pen isn't working with your LG Plasma TV, first ensure you've entered Pentouch mode using the remote. Check that the Pentouch dongle is connected to the computer and the red LED is on. Also, verify the touch pen is powered on by pressing the power button, and that it's paired for use. Finally, set the computer screen to display only on the TV.
Warning about electric shock hazard and not opening the cover.
Explanation of electrical grounding requirements for safety.
Identification of TV parts and buttons for specific models.
Safety precautions and methods for safely lifting and moving the TV.
Instructions and safety tips for mounting the TV on a wall.
Explanation of how to connect devices using HDMI for video and audio.
Options for connecting a PC to the TV via HDMI, DVI, or RGB.
Guide for connecting USB storage devices to the TV for content playback.
Detailed explanation of the features and functions of the Magic Remote Control.
Step-by-step guide on how to register the Magic Remote Control with the TV.
Guide for initial TV setup and language/region selection.
Common troubleshooting steps for general TV issues.
Troubleshooting tips for image-related problems.
Troubleshooting steps for audio-related issues.
Technical details on IR code output waveform and frame configuration.
Information and instructions for setting up the RS-232C serial port.
Reference list of commands for controlling the TV externally.
Details on the different 3D modes and formats supported by the TV.
Instructions for cleaning the TV screen, frame, cabinet, and stand.
General| 3D | Yes |
|---|---|
| Depth | 53 mm |
| Width | 1386.8 mm |
| Height | 818.2 mm |
| Weight | 36400 g |
| Tuner type | Analog & digital |
| Comb filter | 2D/3D |
| Pixel pitch | - mm |
| Smart modes | Cinema, Game, Personal, Standard, Vivid |
| Audio system | Dolby Digital |
| Package depth | 284.5 mm |
| Package width | 1544.3 mm |
| Product color | Black |
| Package height | 950 mm |
| Package weight | 48080 g |
| Cables included | AC |
| RMS rated power | 20 W |
| AC input voltage | 100 - 240 V |
| Display diagonal | 59.8 \ |
| AC input frequency | 50 - 60 Hz |
| Built-in subwoofer | No |
| Depth (with stand) | 354.7 mm |
| Display brightness | - cd/m² |
| Display technology | Plasma |
| Number of speakers | 2 |
| HDMI ports quantity | 4 |
| Height (with stand) | 883.2 mm |
| Placement supported | Horizontal |
| Weight (with stand) | 40600 g |
| Supported video modes | 1080i, 1080p, 720p |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Contrast ratio (dynamic) | 3000000:1 |
| Contrast ratio (typical) | - |
| Panel mounting interface | 600 x 400 mm |
| Annual energy consumption | - kWh |
| Digital audio optical out | 1 |
| Screen format adjustments | 4:3, 16:9, Zoom |
| Analog signal format system | NTSC |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 183 W |
| Digital signal format system | ATSC |
| Supported graphics resolutions | 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| On Screen Display (OSD) languages | ENG, ESP, FRE, KOR |
| Consumer Electronics Control (CEC) | Anynet+ |
To Next Page
