4
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product. The illustrations in this manual may differ from the actual product and item.
Remote control,
Batteries (AAA)
Owner’s manual,
CD manual
Cable Holder
x 3 x 4
M5 x 16 M4 x 30
Screw for assembly
Power Cord Holder Power Cord
Protection Cover Ferrite core
(Depending on model)
Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing cloth.
Stand Body Stand Base Isolator
1
(Depending on model)
Only 42/50PA45**, 50/60PA55**, 50/60PA65**
INSTALLATION PROCEDURE
1
Open the package and make sure all the accessories are included.
2
Attach the stand to the TV set.
3
Connect an external device to the TV set.
To Next Page
Loading...
Need help?
General
