10
Precautions When Cleaning the Product
WARNING
Failure to observe these instructions may result in serious injury or death.
• Do not spray water directly onto the product and do not use inflammable materials such as thinner or benzene to
wipe the product.
- Attempting repair or modification yourself may cause a fire hazard or result in electric shock.
• Contact the sales representative or service center for internal cleaning of the product approximately once a year.
- If you do not clean the product, dust will accumulate inside and may create a fire hazard or malfunction.
• Always wear protective gear, such as gloves, when cleaning the panel as the parts where the edges meet are very
sharp.
CAUTION
Failure to observe these instructions may result in minor injury or damage to the product.
• To clean the product, unplug the power cord and wipe it gently with a soft cloth. Do not spray with water or wipe with
a wet cloth. When cleaning the product or the screen, do not use cleanser, automobile or industrial shiner, abrasive or
wax, benzene, alcohol, etc., as this may damage the product.
- This may create a fire hazard, and result in electric shock or product damage (deformation, corrosion or breakage).
• Use a ladder when cleaning the product.
- Never use ladders that must be mounted on the product as this may damage the screen.
• Never use rods, etc. to apply excessive force to the product as this may cause damage to the product.
Precautions When Experiencing Image Sticking
• Displaying a still image for a prolonged period of time may cause damage to the screen, resulting in image sticking.
• Most third-party products have the same issue. The resulting damage is not covered by the product warranty.
To Next Page
Loading...
Need help?
General
