LG 65TC3D - User Manual

Other manuals for LG 65TC3D

Questions and Answers

S
Sarah MuellerAug 20, 2025
How to fix no image displayed on LG Digital Signage?
- L
  Laura SmithAug 20, 2025
  If no image is displayed on your LG Digital Signage, first, ensure the power cord is correctly plugged into the power outlet. Then, check the signal cable and access the input menu to check the input signal. Also, verify that the signal from the PC (Graphic card) is within the product's vertical or horizontal frequency range, adjusting if necessary by referring to the Specifications in this manual.
C
Carlos StoneAug 22, 2025
Why is the screen color abnormal on my LG Digital Signage?
- G
  George ButlerAug 22, 2025
  If the screen color on your LG Digital Signage appears abnormal, try setting the number of colors to more than 24 bits (true color) via Control Panel - Display - Settings - Color Table menu in Windows. Also, check the connection status of the signal cable and re-insert the PC graphic card.
A
Ashley RoseAug 25, 2025
What to do if the audio function does not work on LG 65TC3D Digital Signage?
- K
  Kimberly ArmstrongAug 25, 2025
  If the audio function does not work on your LG Digital Signage, make sure the audio cable is connected properly. Then, adjust the volume and ensure the sound is set appropriately. Also, try selecting the appropriate equalizer sound.
E
eric23Aug 26, 2025
Why does the screen image look abnormal on my LG 65TC3D?
- T
  Timothy CaseyAug 26, 2025
  If the screen image looks abnormal on your LG Digital Signage, check if the graphic card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu. Also, ensure you connect the signal cable that matches the source input signal.
M
Michael DaviesAug 27, 2025
What to do if there is a problem with the touch response on LG Digital Signage?
- T
  timothyandersonAug 28, 2025
  If there is a problem with the touch response on your LG Digital Signage, try the following steps: 1. Remove the USB cable and connect it again after 10 seconds. 2. Check the USB cable connection. 3. Check the PC power. 4. Restart your PC. 5. Check the signal cable connection. 6. Check the monitor power. 7. Ensure the power cord is connected to a grounded outlet. 8. Verify that the screen is on.
M
michaelwilliamAug 30, 2025
Why is a touch applied to a monitor other than the one I intended on my LG Digital Signage?
- M
  Mitchell MendozaAug 30, 2025
  This can occur if the monitor is not set as the default monitor when you are using multiple monitors, so set the monitor as the default monitor. This may also occur when the touch screen is not calibrated properly, so change your tablet PC settings.
C
cortezscottAug 31, 2025
Why does the location of a touch not correspond to the touch coordinates on my LG Digital Signage?
- I
  iandersonAug 31, 2025
  This may occur when the touch screen is not calibrated properly, so change your tablet PC settings.
D
Diane GarciaSep 2, 2025
What to do if the operation does not work normally on LG 65TC3D?
- R
  ryanpatriciaSep 3, 2025
  If the operation of your LG Digital Signage does not work normally, check if the Timer is set and review the power control settings. Also, check for any power interruptions.
J
John BryantSep 4, 2025
Why does after-image appear on the LG Digital Signage?
- H
  Heather HarrisSep 4, 2025
  If you see an after-image on your LG Digital Signage, and you've been using a fixed image for a long time, it may be due to pixel damage. Use the screen-saver function to prevent this. Note that this can be normal for LCD screen products.
L
Lindsey LuceroSep 6, 2025
What to do if the Unknown Product message appears when LG 65TC3D is connected?
- Y
  Yolanda StoneSep 6, 2025
  Check if the Plug and Play function is supported by referring to the graphic card user manual.

LG 65TC3D Specifications

General

Operating Temperature	0 °C to 40 °C
Storage Temperature	-20 °C to 60 °C
Standby Power Consumption	0.5W
Screen Size	65 inches
Viewing Angle	178° / 178°
Response Time	8 ms
Bezel Width	9.9 mm (Even Bezel)
Input Ports	HDMI, USB