LG 65WU960H - Page 37

37
206-4335
Ez Download Utility (Cont.)
(Continued from previous page)
A list of available les is displayed to the right of the le type elds. In the case of image/
icon les, once you select the “Download Image File(s)” or “Download Icon File(s)” option,
you will need to also select the appropriate type or category of image/icon le (hotel directory
image, hotel icon image, etc.) before selecting the image/icon le(s) itself/themselves.
• Then, use the arrow keys to select the desired le(s).
Note: With the exception of hotel directory image les, the utility will only allow you to select one
of each le type for downloading. For example, if there are two les in the Ez Download “Import
Clone File” list, you can only select one or the other of those two les.
Note: The initial default value for each le type is “None.” After the Ez Download utility is run,
a le is automatically created and stored on the USB device that was used. The le, which
will have a “.dzm” le extension, maintains a history of the le(s) previously used with the Ez
Download utility. The next time(s) you use this USB device with the Ez Download utility, the
le(s) selected for the last download will be pre-selected for the current download, thus
facilitating the process of conguring additional TVs of this model using the same USB device.
If you ever want to restore the le selections on the Ez Download screen to “None,” select the
RESET button and press the Wheel (OK) button.
Note: The current TV software (CPU) or PTC software version is always displayed above the
listing of available TV software and PTC software les, respectively. Ensure the software version
of the selected le is the correct version before applying the update to this TV.
9. If a Clone/Conguration (.tlx) le that includes an FTG Channel Map is selected, a Channel
Tuning / Channel Banner Display eld will be displayed at the right of the screen. If the FTG
Channel Map comprises RF channels and Aux inputs only (the latter designated by 130-0
through 137-0), you can choose the format for the channel tuning/banner display. Use the
arrow keys on the Installer Remote to select Logical tuning or Physical tuning. A checkmark
will appear at the left of the selected option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if
the selected “.tlx” le does not include an FTG Channel Map, the message, “No Channel Map
in Clone le,” will be displayed at the right of the screen.
10. When you are ready to continue, use the arrow keys on the Installer Remote to select
DOWNLOAD, and then press the Wheel (OK) button.
Download/update progress will be displayed on the screen. Do NOT remove the USB device
while downloads/updates are in progress. When the Ez Download process is complete, an
overview of the results will briey be displayed and then, the TV will reboot.
11. Remove the USB memory device, and verify that the appropriate configuration/download(s)/
update(s) is/are resident on the TV.
Note: If you updated the TV configuration with a Clone/Conguration file, upon restart, the TV
tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specied,
the TV will tune to that channel, though in the case of FTG Mode conguration, a channel banner
will only be displayed if the Start Channel is included in the FTG Channel Map (depending on your
selection in step 9, the channel banner will display either the Start Channel’s logical channel
number or physical RF channel number). Otherwise, the TV will either return to the last channel
tuned (TV in Pass-through Mode) or tune to the rst channel in the FTG Channel Map (TV in
FTG Mode). In the latter case, remember that the channels in the FTG Channel Map are always
arranged in logical order, regardless of your selection in step 9.