10
Using the Button
You can simply operate the monitor functions, using
the button.
Basic Functions
Power On (Press)
Power Off
1
(Press and Hold)
Menu control (Press
2
)
Menu selection (Press and Hold
3
)
1 All running apps will close.
2 You can access and adjust the menu by pressing the
button when monitor is on.
3 You can use the function when you access menu
control.
Adjusting the Menu
When the monitor is turned on, press the button
one time. You can adjust the Menu items using the
button.
Turns the power off.
Changes the input source.
Adjusts the volume level.
Using Remote Control
The descriptions in this manual are based on the
buttons on the remote control. Please read this
manual carefully and use the monitor correctly.
To install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the
and ends
to the label inside the compartment, and close the
battery cover.
To remove the batteries, perform the installation
actions in reverse. This remote uses infrared light.
When in use, it should be pointed in the direction of
the monitor’s remote sensor.
(Some buttons and services may not be provided
depending upon models or regions.)
To Next Page
Loading...
Need help?
General
