LG 72WS70MS - Page 68

68
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
17. White Balance Red Gain (Command: j m)
To adjust white balance red gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data
00~FE: Red gain 0~254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
20. ISM mode (Command: j p)
Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01 : Inversion
02 : Orbiter
04 : White Wash
08 : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
18. White Balance Green Gain (Command: j n)
To adjust white balance green gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data
00~FE: Green gain 0~254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
21. Energy Saving (Command: j q)
To reduce the power consumption of the Monitor.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
04: Auto
00: Off
01: Minimum
02: Medium
03: Maximum
05: Screen off
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
19. White Balance Blue Gain (Command: j o)
To adjust white balance blue gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00~FE: Blue gain 0~25
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
22. Auto Config. (Command: j u)
To adjust picture position and minimize image
shaking. Automatically. NB : Only applies to RGB(PC)
mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
01 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]