SMART TV Quick Setup Guide
ENGLISH
Registering the Magic Remote Control
(The following instructions will show you how to use the magic control)
The Magic Remote Control operates by pairing with your TV.
Please register the Magic Remote Control before using it.
How to register the Magic Remote Control
To register the remote control, press the
(Wheel) on the remote control.
How to Re-register the Magic Remote Control if registration fails
1
Press and hold the (BACK) and HOME buttons together for 5 seconds to reset,
then register it by following How to register the Magic remote control above. (Once
the reset is complete, the light on the Pointer blinks.)
2
To re-register the Magic remote control, press and hold the (BACK) button for 5
seconds toward the TV. (Once the reset is complete, the light on the Pointer blinks.)
HOMEBACK
VOL
CH
Updating the TV Firmware
H
O
ME
→
Settings
→
SUPPORT
→
Software Update
Uses Software Update to check and obtain the latest version. If not updated, certain functions may not work properly. It is also
possible to check manually for available updates.
Software Update Set it to On.
When an updated file is detected, the file is downloaded automatically.
When the file download is complete, the software update window appears.
Check Update Version Checks the latest update version installed. When a new update is available, the download
process can be performed manually.
y
The latest version can be obtained via the digital broadcast signal or an internet connection.
y
Changing the program while downloading the software via a digital broadcast signal interrupts the download
process. Returning to the initial program allows downloading to resume.
y
If software is not updated, certain functions may not work properly.
NOTE
P/NO: MBM63660403 (1201-REV00)
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS.
To Next Page
Need help?
General
