GP4
ENG
❐
To use the Motion Recognition function
1 Install the LG video call camera (AN-VC400, sold separately) on the TV.
2 Go to HOME ➾ Settings ➙ OPTION and check if Motion Recognition is set to
On.
3 With the TV on, face towards the camera and hold your hand up close to your
face. The motion recognition controller appears on the TV screen. (You can
check the motion recognition range of the camera in HOME ➾ Settings ➙
OPTION ➙ Camera Setting Help.)
4 Move your hand left, right, up or down to select a function you want and then
clench your fist to start the function.
5 The controller disappears when you lower your hand.
To Next Page
Loading...
