LG A09AW1 User Manual

12 Room Air Conditioner
During Healthy Dehumidification Operation
❏ If you select the dehumidification mode on the OPERATION MODE SELECTION
BUTTON, the product starts to run the dehumidification function. It automatically sets
the room temperature and airflow volume to the best condition for dehumidification,
based on the sensed current room temperature.
In this case, however, the setting temperature is not displayed on the remote controller
and you are not able to control the room temperature either.
❏ During the healthy dehumidification function, the airflow volume is automatically set
according to the optimization algorithm responding to the current room temperature
status, so that the room condition is kept healthy and comfortable even in the very
humid season.
Auto operation basically is heating or cooling function of the air conditioner.
But during this operation the controller changes the operation mode
automatically to keep the temperature within ±2°C with respect to the
setting temperature.
Operating Instructions
In this operation mode the actual setting temperature and the fan speed are
automatically set by the electronic control logic based on the current room
temperature. If you feel hot or cold press the temperature setting buttons
respectively for more cooling or heating effect.
NOTE : You cannot set the actual setting temperature and the indoor fan
speed in this operation mode. But you can use the Chaos swing
in this operation.
If the system is not operating as desired, switch manually to another mode.
Auto Operation (Cooling Only Model)
Auto Changeover Operation (Heat Pump Model)
Healthy Dehumidification Operation
This operation circulates the air without cooling or heating. It can
be activated by pressing the OPERATION MODE SELECTION
BUTTON. Once the air circulation is activated you can select the
air speed by pressing the INDOOR FAN SPEED SELECTOR
BUTTON.
CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically
changed from high to low or vice versa, depending on the ambient temperature.
NOTE
Air Circulation Operation

LG A09AW1 Specifications

General

Type	Split system
Thermostat range	16 - 30 °C
Remotely operated	Yes
Refrigerating medium	R410A
Cooling capacity (max)	9210 BTU/h
Heating capacity (max)	11940 BTU/h
Cooling capacity in watts (max)	2700 W
Heating capacity in watts (max)	3500 W
Cooling energy efficiency (EER, W/W)	3.25
Indoor unit type	Wall-mountable
Power requirements	AC 230V, 3.8/4.4A
Power consumption (typical)	830 W

Weight and Dimensions

Weight	15000 g
Dimensions (WxDxH)	600 x 146 x 600 mm