LG A09AW1 User Manual

1. Choose a suitable place where its safe & easy
to reach.
2. Fix the holder to wall etc with the supplied
screws firmly.
3. Slide the remote controller inside the holder.
1. Remote controller should never be exposed to
direct sunlight.
2. Signal transmitter & receiver should always be
clean for proper communication. Use a soft
cloth to clean them.
3. In case some other appliances also get
operated with remote control, change their
position or consult your serviceman.
1. The signal receiver is inside the unit.
2. Aim the remote controller towards the unit to operate it.
There should not be any blockage in between.
NOTE
ENGLISH
Owner's Manual 9
Operating Instructions
How to insert the Batteries
Wireless Remote Controller Maintenance
1. Remove the battery cover by pulling it according to the arrow direction.
2. Insert new batteries making sure that the (+) and (-) of battery are
installed correctly.
3. Reattach the cover by sliding it back into position.
1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the batteries to
save their working life.
3. If the display screen of remote controller starts, fading replace both of
the batteries.
4. Use 2 AAA(1.5 volt) batteries.
NOTE
Operating Instructions
Operating Method

LG A09AW1 Specifications

General

Type	Split system
Thermostat range	16 - 30 °C
Remotely operated	Yes
Refrigerating medium	R410A
Cooling capacity (max)	9210 BTU/h
Heating capacity (max)	11940 BTU/h
Cooling capacity in watts (max)	2700 W
Heating capacity in watts (max)	3500 W
Cooling energy efficiency (EER, W/W)	3.25
Indoor unit type	Wall-mountable
Power requirements	AC 230V, 3.8/4.4A
Power consumption (typical)	830 W

Weight and Dimensions

Weight	15000 g
Dimensions (WxDxH)	600 x 146 x 600 mm