43
MAINTENANCE
ENGLISH
Cleaning the Wide Slim Hard
Floor Nozzle
• Be careful not to injure your fingers when using
a screwdriver.
1
Press the nozzle release button
a
to remove
the nozzle from the extension pipe or product
body.
2
Turn the nozzle upside down and remove the
rotating brush while holding down the
PUSH
button on the nozzle.
• When removing the rotating brush from the
nozzle, part of the edge of the rotating brush
may detach. Reassemble the rotating brush by
holding the rotating brush and the detached
part of the edge and pushing them in until a click
is heard.
3
Attach the crevice tool to the product body and
use the vacuum to remove foreign objects and
dust from the brush and the bottom of the
nozzle.
4
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Do not wash the rotating brush and the
nozzle with water or immerse them in water.
• Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
5
Remove foreign objects, debris and hair from
all Rollers of the nozzles using tweezers.
To Next Page
Loading...
Need help?
General
