LG AC12BK - Energy Control and UVnano Functions

25
EN
Using the Energy Control
Function (Optional)
1
Turn the appliance on.
2
Press Energy Ctrl button.
• Press Energy Ctrl button repeatedly to
select each step.
NOTE
• 1 step : The power Input is decreased by 20
% compared to rated power input.
−
is displayed on the display screen.
• 2 step : The power Input is decreased by 40
% compared to rated power input.
−
is displayed on the display screen.
• 3 step (Optional) : The power Input is
decreased by 60 % compared to rated power
input.
−
is displayed on the display screen.
•
(1 step), (2 step) is displayed on some
indoor units.
• This function is available with Cooling Mode.
• Capacity may decrease when Energy Control
mode is selected.
• Desired temperature is displayed about 5
seconds if you press Fan Speed,
or
button.
• Room temperature is displayed about 5
seconds if you press Room Temp button.
• When connected to the Multi Outdoor unit, this
function may not be supported.
Using UVnano Function
(Optional)
UVnano is a compound word of UV (ultraviolet
rays) and nanometer (length unit).
This function reduces various bacteria inside
the air conditioner.
Model name: LTPL-G35UV275GS-JA
LTPL-G35U275GS-TWA
CUD7GF1A
Press Jet Mode button and hold it about 3
seconds.
NOTE
• UV is displayed on some indoor units,
depending on the model.
• The UV LED operates at regular intervals to
keep the fan clean.
• The UVnano function stops when the air
conditioner is turned off.
• When Auto Clean Function starts, UVnano
Function works together to keep the fan clean.
• This function is disabled with Heating Mode.