ENGLISH
27
Power On Default
• Set the programme to display, etc. when turn on power.
• When set to Off, it is not applied to the subordinate Input, Programme, A/V Setting, Aspect Ratio menu.
• When set to On, it can set by entering the subordinate menu.
Input
• Set whether it is turned on by the set input source or by the last stored input source.
Programme
• Select start programme number if Input is TV.
A/V Setting
• If ‘A/V Setting’ is changed from ‘Off’ to ‘On’, A/V parameters that are set before entering ‘Installation Menu’ are applied whenever turn on power.
Aspect Ratio
• The aspect ratio determines the default aspect ratio that the set returns to on power up.
Aux Source Setting
• Set to On or Off.
• Set to enable or disable for each external input.
• User cannot disable the current input.
Power Management
• Turn off the TV if no input control command is received from either the Local or IR Key within a selected hours.
-
Activity on either of these inputs shall reset the ‘Power Management’ timer.
-
This entry can be set to a value which is corresponding to the desired hours (1 hour to 7 hours).
-
Default value is ‘Off’.
Radio Video Blank
(Depending on model)
• When set to On, ‘Video Blank’ works only in case of Radio Programme.
• Although set to On, if there are Video signal, ‘Video Blank’ wouldn’t work. In consideration of case that display background screen and broadcast only
with Radio, ‘Video Blank ’works only when there is no Video signal.
• When set to Off, ‘Video Blank’ do not work although it is the Radio Programme.
• This operates only in the Analog TV Mode.
Factory Reset
• Change all settings to their default values.
To Next Page
Loading...
Need help?
General
