PRODUCT INTRODUCTION
ENGLISH
11
Handling the remote control
- Aim at the signal receptor on the floor standing type air
conditioner when operating.
- Block a strong light over the signal receptor with a
curtain or etc. so as to prevent the abnormal operation.
(ex: electronic quick start, ELBA, inverter type
fluorescent lamp)
- Be sure that there are no obstructions between the
remote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to
direct sunlight, or next to a heating unit, or other heat
source.
Control
panel
Description
Power ON/OFF button :Operation will start when
this button is pressed, and stop when the button
is pressed again.
Temperature setting button
Indoor fan speed button : To select the desired
fan speed.
Cooling button
Fan mode button
Air flow direction button(Up/down) :
Adjust air flow direction vertically.
Air flow direction button(Left/right) :
Adjust air flow direction horizontally.
ON/OFF timer setting button : Set the time of
starting or stopping
Artificial intelligence
Dehumidification button
Power cooling mode button : Powerful cooling
is performed
Auto Air flow operation button : It is
useless in this model
< Type2 >
To Next Page
Loading...
