INSTALLATION
9
ENGLISH
Precautions in bending
1
If it is necessary to bend or stretch the tubing, use the spring which is attached to the tubing
instead of pipe bender.
- Please make a careful notice to make a smooth line.
- Hold the tubing with your two hands closely and then bend or stretch it slowly not to make
any crack.
- Remember that the radius (R) should exceed 70 mm (Refer to Fig. 1)
2
Do not repeat the bending process to prevent the tubing from cracking or crushing.
3
Keep in mind that the bending part should not be cracked and make the radius (R) as long as
possible (Refer to Fig. 2)
(Fig. 1)
(Fig. 2)
To Next Page
Loading...
