LG APNQ55GT3E1 - Wireless Remote Controller

PRODUCT INTRODUCTION
ENGLISH
11
Wireless remote controller
Heat Pump
Handling the remote control
- Aim at the signal receptor on the floor standing type air
conditioner when operating.
- Block a strong light over the signal receptor with a curtain
or etc. so as to prevent the abnormal operation. (ex: elec-
tronic quick start, ELBA, inverter type fluorescent lamp)
- Be sure that there are no obstructions between the re-
mote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to
direct sunlight, or next to a heating unit, or other heat
source.
1
5
2
6
9
11
13
4
3
8
10
12
7
No.
Control
panel
Description
1
r
Remote controller operation lamp
2
|
Power ON/OFF button : Operation will
start when this button is pressed, and
stop when the button is pressed again.
3
4
FAN SPD
Indoor fan speed button : To select the
desired fan speed.
4
Temperature setting button
5
A
Cooling button
6
B
Heating button
7
Auto dry button : If setting this function,
evaporator will be automatically dried be-
fore turning off the air conditioner.
8
X
Child lock button : In operation this func-
tion, display key will be locked and air
conditioner indicates “CL” on its display
panel.
9
Fan mode button
10
IJ
Air flow direction button(Up/down,
Left/right) : Adjust air flow direction verti-
cally or horizontally.
11
Power cooling/heating mode button :
Powerful cooling/heating are performed
within short time
12
ON/OFF timer setting button : Set the
time of starting or stopping
13
Timer cancel button
1,MFL67724511,영어 2017. 7. 6. 오후 5:33 페이지 11