2005 Product Data 87
12.Function of Remote Controller
Type 4. (Wireless Simple)
The remote control transmits the signals to the system.
(1) Operation Mode
(2) Operation PROCEDURE
1st
2nd
3rd
4th
Start/Stop Button
Operation Mode Selection Button
Room Temperature Setting Button
Indoor Fan speed Selection Button
OPERATION DISPLAY
Displays the operation conditions.
CHAOS SWING BUTTON
Used to stop or start louver movement and
set the desired up/down airflow direction.
OPERATION MODE SELECTION
BUTTON
Used to select the operation mode.
OFF TIMER BUTTON
Used to set the time of stopping operation.
START/STOP BUTTON
Operation starts when this button is
pressed, and stops when the button is
pressed again.
ROOM TEMPERATURE SETTING
BUTTONS
INDOOR FAN SPEED SELECTION
BUTTON