THE OUTDOOR UNIT INSTALLATION
7
ENGLISH
Connecting the cable to Out-
door Unit
- Remove the side panel or cover control for
wiring connection.
- Use the cord clamp to fix the cord.
- Earthing work
• Case 1 :Terminal block of Outdoor Unit
have mark.
* Connect the cable of diameter 1.6mm
2
or
more to the earthing terminal provided in
the control box and do earthing.
• Case 2 :Terminal block of Outdoor Unit
don't have mark.
* Connect the cable of diameter 1.6mm
2
or
more, to the panel of control box,
marked as and fasten with earth
screw.
CAUTION
• The circuit diagram is not subject to
change without notice.
• Be sure to connect wires according to
the wiring diagram.
• Connect the wires firmly, so that not to
be pulled out easily.
• Connect the wires according to color
codes by referring the wiring diagram.
!
To Next Page
Loading...