16 Multi Air Conditioner
Operating Instructions
Jet cool function can be used to cool the room quickly in hot summer. When this
function is turned on, the air conditioner runs in cooling operation mode with super high
fan speed and 18°C(64°F) setting temperature for 30 minutes for fast and effective
cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly by
operating at super high fan speed and 30°C(86°F) setting temperature for 30 minutes.
You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL
BUTTON or INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE
SETTING BUTTON again.
• Jet Cool/Heat operation cannot be activated during Air Circulation operation and auto operation.
Energy-saving cooling mode can save energy in cooling operation, because it can operate efficiently by
setting body-adaptation time according to the change of time and temperature and adjusting desired
temperature automatically.
[Ceiling Cassette Type]
1. Press the FUNCTION button 2 times. Energy-Saving Cooling Mode
symbol will bilnk.
2. Press the SET/CLEAR button to reserve or cancel the Energy-Saving
Cooling mode.
[Standard Libero/Artcool Libero Type]
1. Press the ENERGY-SAVING COOLING MODE BUTTON.
2. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODE BUTTON again and unit will operate in previous
mode(Cooling mode).
The Display Luminosity can be adjusted by using the remote control.
Open the cover of the remote controller, and press the LCD/LED LUMINOSITY button.
Display will be dark. Press the button again to set bright display.
Display Luminosity (Optional)
Energy-Saving Cooling Mode (Optional)
Jet Cool/Heat Operation(Optional)
To Next Page
Loading...
Need help?
General
