Operating instructions
10 Indoor Unit
Standard Operation - Standard Cooling
Standard Operation - Heating Mode
Operating instructions
Press button to turn on the
indoor.
1
Press button to select
Cooling operation mode.
2
Adjust the desired temperature
by pressing buttons.
Press button to check the
Room temperature.
When setting the desired
temperature higher than room
temperature, only ventilation
wind is blow out instead of
cooling wind.
3
h Setting Temp Range : 18˚C~30˚C (64˚F~86˚F)
It cools the room by comfortable and clean wind.
It supplies warm wind to the indoor
Press button to turn on the
indoor.
1
Press button to select
Heating mode.
(To check the indoor temperature,
press the room temperature button.)
2
Adjust the desired temperature
by pressing buttons.
When setting the desired
temperature lower than room
temperature, there is only
ventilation wind.
3
• Heating drive only operates at the cooling and heating model.
• Heating doesn't operate at cooling exclusive model.
Downloaded from AC-Manual.com Manuals
To Next Page
Loading...
