LG CEILING CONCEALED DUCT - Dehumidification and Auto Changeover Modes

Operating instructions
Ownerʼs Manual 11
ENGLISH
Press button to turn on the
indoor.
1
Press button to select
Dehumidification mode.
The temperature setting can not be
adjusted during operation this mode.
2
Press the button to select
airflow rate feeble → weak →
medium → strong → automatic.
(The initial wind powerfulness of
humidity removal drive is 'weak'.)
3
It removes humidity while air-cooling weakly.
• In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
• The menu item of wind powerfulness might not be partially selected according to the product.
Standard Operation - Dehumidification Mode
Auto Changeover Mode
Repeat pressing button until
icon flash.
1
Press button to change.
❈ Converting temp value : 1~7
2
Press button to complete
and active the setting process.
3
Press button to exit or
system will automatically release
without any input after 25
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.
4
Change temperature is the function to setup air-cooling and heating drive automatically changeable
according to the temperature at artificial intelligence drive mode.
Downloaded from AC-Manual.com Manuals