Operating instructions
14 Indoor Unit
It is the function to use preventing children or others from careless using.
Function setting - Child Lock
Press button repeatedly until
the is flashing.
1
If moving to 'setup' icon area by
using button, 'setup' icon
blinks, and child lock function is
setup if pressing button at
that time.
2
When cancelling lock function, if moving
to 'cancel' icon by pressing button
and then, pressing button, child lock
function is cancelled.
3
Press button to exit.
❈
After setup, it automatically gets out of setup
mode if there is no button input for 25 seconds.
❈
When exiting without pressing set button, the
manipulated value is not reflected.
4
Repeat pressing button until
icon flash.
1
Press button to change.
❈ Converting temp value : 1~7
2
Press button to complete
and active the setting process.
3
Press button to exit or system
will automatically release without any
input after 25 seconds.
❈
When exiting without pressing set button,
the manipulated value is not reflected.
4
Change temperature is the function to setup air-cooling and heating drive automatically changeable
according to the temperature at artificial intelligence drive mode.
To Next Page
Loading...
