Press button to enter the
Programming mode.
(the segment flashing)
Ex) Setting Simple Reservation
time as '3'.
1
Press button to adjust reservation
time.
2
Press button to finish setting.
3
Press button to exit.
❈ After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
4
You can set the reservation conveniently in the units of 1 hour from 1 hour to 7 hours.
h When simple reservation setup, product automatically runs or stops after the time that is set.
To Next Page
Loading...
