20
ENGLISH
Using the Joystick Button
You can operate the projector by pressing the button or moving the joystick left,
right, up, or down.
Basic functions
Power On When the projector is turned off, place
your nger on the joystick button, press it
once, and release it.
Power Off When the projector is turned on, place
your nger on the joystick button, press
it once for a few seconds, and release it.
(However, if the Menu button is on the
screen, pressing and holding the joystick
button will let you exit the Menu.)
Volume
Control
Place your nger over the joystick button
and move it left or right, you can adjust
the volume level.
Channels
Control
Place your nger over the joystick button
and move it up or down, you can scroll
through the saved channels.
• Place your finger over the joystick button and move it up, down, left, or right.
Be careful not to press the joystick button. If you press the joystick button
first, you may not be able to adjust the volume level and/or scroll through
saved channels.
To Next Page
Loading...
Need help?
General