Operating 21
Operating
3
Radio Operations
Be sure that FM/AM aerial is connected.
(Refer to the page 17)
Listening to the radio
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM or AM appears in
the display window.
The last received station is tuned in.
2. Auto tuning : Press TUNING -/+ on the remote
control or
Y/U
on the unit for about 2
seconds until the frequency indication starts
changing, then release. scanning stops when
the unit tunes in a station.
Manual tuning: Press TUNING -/+ on the
remote control or
Y/U
on the unit
repeatedly.
3. Adjust the volume by pressing VOL(+/-) on the
remote control or by rotating volume knob on
the unit repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM/AM appears in the
display window.
2. Select the desired frequency by pressing
TUNING-/+ on the remote control or
Y/U
on the unit.
3. Press PROGRAM/MEMORY. A preset number
will blink in the display window.
4. Press PRESET·FOLDER
W
/
S
to select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET·FOLDER
W
/
S
or 0 to 9 numerical
buttons.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds. “ERASEALL” will blink in the unit display.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press
d
/
M
on the remote control or
T
ST./MO.
on the unit. This will change the tuner from stereo
to mono. Then the reception will be better than
before.
CM4530-AB_DUSALLK_ENG_7506.indd 21 2013-01-25 3:59:42
To Next Page
Loading...
Need help?
General
Weight and Dimensions
